Before enjoying your RELXTIME hot tub for the first time, there are a few important things to check.
Check the Water Level
Make sure the water level is between the MIN and MAX lines before operating the spa.
Never operate the pump or heating system when the water is below the minimum water level.
Check the Water Flow
Before using the spa for the first time, make sure the water flow is not blocked in the pipes.
The filter cartridges and filter covers should also be properly installed.
Check the Safety Switch
The safety switch at the end of the power cable should be checked before each use.
Do not use the spa if the safety switch is not working properly. Do not bypass or open the safety switch.
Keep the Cover Secure
Always cover and lock the spa during heating and between uses, especially to prevent unsupervised access by children.
Use the Right Water
Use appropriate water treatment products to maintain water quality.
Do not use bath salts, rainwater, surface water, seawater, or oils in the spa.
Before Entering
Shower thoroughly before entering the spa to help keep pollen, dust, dandruff, and other particles out of the water.
Never jump into the spa, and always enter and leave slowly and carefully because wet surfaces can be slippery.
For more information about safe use, see How to Safely Use Your RELXTIME Hot Tub.
