If you plan to leave your RELXTIME hot tub unused for an extended period or over the winter, proper storage can help protect the spa and its components.
1. Drain the Water
Remove the rubber plug inside the spa and unscrew the cap of the outlet hose outside the spa.
Once the water has drained, activate the BUBBLE function to help remove residual water from the ventilation system.
2. Disconnect the Power and Remove the Filter
Remove the safety switch from the socket and remove the filter cartridge.
3. Clean and Dry the Spa
Clean and dry the spa tub and all accessories.
Make sure there is no residual moisture left inside the spa. You can use the pump to blow dry the spa, pump, and pipes.
4. Deflate the Spa
Drain all the air from the spa tub.
To deflate the spa, remove the entire gray screw connection of the air valve located in the lower area outside the spa tub.
5. Fold the Spa
Loosely fold the spa and avoid creating sharp corners that could damage the material.
6. Store in a Dry, Frost-Free Place
Store the spa in a dry and frost-free place.
You can use the original packaging and transportation bag to store the spa and its accessories.
Important: Avoid Freezing Conditions
Do not store your RELXTIME hot tub in freezing conditions.
Plastic can become brittle and fragile when exposed to sub-zero temperatures, and freezing conditions can cause severe damage to the spa.
Ready to Use Your Spa Again?
Before setting up your spa after long-term storage, make sure it has been stored in a dry, frost-free environment and check the spa and its accessories before use.
For more information, see How Do I Prepare My Hot Tub After Long-Term Storage?
